4 Module Crossflow

• Crossflow is made completely in stainless steel AISI 304
• Unit comes standard with hollow fibre membranes in either polypropylene or ployethersulfone, depending on the application. Both membranes are resistant to a wide range of chemical agents, heat action, and mechanical stress
• Filter is capable of by-passing modules for smaller lots
• Frequency drive to
  + VIEW PRODUCT

Top 15 Destemmer (1)

• 100% stainless steel
• Perforated basket with tapered holes to minimize stem breakage
• Beating shaft with paddles covered in rubber
• Paddles are moveable and adjustable to maximizing destemming effect
• Front panel of the unit mounted on hinges and opens upward for quick access to the destemming area
• Two hydraulic pistons quickly lift front cover
• Beating shaft and
  + VIEW PRODUCT

4 Spout Manual Pressure Filler (Qty 5)

• Unit suitable to fill bottles with light or heavy carbonated product such as: wine, beer, cider or juices.
• Unit is entirely in stainless steel with teflon seals, pressure gauge and sight gauge included.
• Each filling valve has a two stage operation.
• First stage pressurization
• Second stage filling
• Unit suitable to work with various sizes (12
  + VIEW PRODUCT

20 bbl Fermenter (Qty 1)

Capacity:

• Working capacity: 20 bbl
• Nominal capacity (25%): 25 bbl

Technical characteristics:

• Operating pressure: 14.9 psi maximum
• Stainless steel shell, 304/2B finish, 2 mm thick
• Domed top, 3 mm thick and conical bottom, 3 mm thick, 60 degree cone
• Dimpled glycol jacket positioned on the side of vessel
• Dimpled glycol jacket positioned on the cone of vessel
• High density
  + VIEW PRODUCT

660G Closed Top Forkliftable Tank (Qty 2)

• 100% stainless steel
• Sloped bottom with drainage reset
• Closed top with manway
• Forkliftable pockets
• Height: 2360mm (7’ 9”)
• Diameter: 1400mm (4’ 7”)
• Rectangular Bottom Manway 420mm x 310mm (16.5” x 12”)
• Round top manway 500mm (20”)
• Total discharge outlet 2” with TRC fittings
• Racking outlet with 2” TRC fittings
• 37” jacket with 1”NPT fittings for glycol
• Pressure/vacuum relief valve and
  + VIEW PRODUCT

Euro 2012 Semiautomatic Filler/Corker Monobloc (Qty 3)

Filler:

• Stainless steel unit on wheels
• Six-valve rotary filler for filling with gravity system
• Mechanical bottle lifting device
• Automatic movement and ability to adjust tank height

Corker:

• Micro-switch controls corker
• Pneumatic lifting of the bottle and hardened ground steel jaws
• Switchboard predisposed with outlet for pump
• Possibility to cork bottles from 0,37 – 2 litres
• Corks: Diameter: 22-30 mm
  + VIEW PRODUCT

Top 10 Destemmer (Qty 2)

• Frame entirely in stainless steel
• Perforated basket with tapered holes to minimize stem breakage
• Beating shaft with paddle covered in rubber
• Paddles are movable and adjustable to maximizing destemming effect
• Front panel of the unit mounted on hinges and opens upward for quick access to the destemming area
• Two hydraulic pistons quickly lift front cover
• Beating
  + VIEW PRODUCT

PG 2010 Vacuum Corker Semiautomatic 1PH (Qty 2)

• 100% stainless steel unit on wheels
• Semi-automatic corking machine
• Mechanical corker machine with on/off switch
• Automatic cork distribution through a hopper
• Bottle lifting is pneumatic
• Electric and pneumatic operations
• Steel jaws and bronze trolleys controlled by numerical control and working center
• Electric panel equipped with commands and protections according with CE norms
• Can bottle 0.375, 0.75 and 1.5
  + VIEW PRODUCT

15 BBL Bright Tank (Qty 1)

• Operating pressure: 14.9 psi maximum
• Stainless steel shell, 304/2B finish, 2 mm thick
• Domed top, 3 mm thick and dished bottom, 3 mm thick
• #1 – Dimpled glycol jacket positioned on the side of vessel
• #1 – Dimpled glycol jacket positioned on the side of vessel
• High density insulation, 2”
• Stainless steel clad, 1.5 mm thick,
  + VIEW PRODUCT

CRV 40 Flexible Impeller Pump

• This unit is a multi-use pump that can be used with a wide variety of products that include, but are not limited to wine, juice and vinegar.
• Flow can be reversible.
• Pump CANNOT run dry
• Cart in 100% stainless steel
• Pump body also 100% stainless steel
• Wheels with foam tires
• TRC fittings
• Food grade rubber impeller (alternative
  + VIEW PRODUCT

2” Lobe Pump (Qty 2)

• Extra motorized cooling fan that will assure proper ventilation and cooling, even at a minimum speed
• Rubber airless wheels
• Stainless steel lobes
• Stainless steel frame
• Controlled by variable frequency drive (single phase)
• Remote unit with speed control
• ON/OFF and reverse operations
• Self-priming
• Can run dry (for a short period of time)
• 2” TRC fittings
• 220 volts / 3 HP /
  + VIEW PRODUCT

PP45 Pneumatic Membrane Press (Qty 1)

• Frame of the unit entirely in stainless steel
• Perforated Cage entirely in stainless steel
• Food grade robust membrane attached for 180°.
• Large side door which allows easy loading and unloading of the press.
• Compressor and Vacuum system included.
• Cage rotating motor complete with brakes to assure perfect halt when needed.
• Electrical and electronic components installed inside
  + VIEW PRODUCT

Mini Line 01 Semi Automatic Labeler (Qty 4)

• Unit able to apply front and back label from same roll to cylindrical container
• Web speed and label timing fully controlled by internal PLC – no adjustment needed
• Dial to regulate label spacing
• Switch to activate or deactivate second label
• Unit capable to work with bottles with diameter that ranges from 60mm up to
  + VIEW PRODUCT

40 x 40- 20 Plate Filter (Qty 3)

• Frame able to hold a maximum of 20 plates
• Plates sized 40×40 cm made in NORYL
• Unit mounted on wheels
• Frame in stainless steel
• Valves and fittings in stainless steel
• Head plate and mobile plate clad in stainless steel
• Filter closure by means of a heavy duty threaded rod
• Pressure gauges
• Sight glasses for product control
• Removable drip collecting
  + VIEW PRODUCT

PG 93 C Semiautomatic Bench Capper (Qty 5)

• 100% stainless steel unit
• Semi-automatic machine
• On/Off switch
• Crown caps are distributed manually
• Pneumatic capper with 2 interchangeable heads for the closure of crown caps
• Bottle sizing: 330 ml – 2 Lt
• Crown caps: 1”-1.14” inch diameter
• Output: 400 bottles per hour (this may vary depending on operator)
• Power: Compressed Air
• Overall Dimensions:
• Length: 220 mm (9”)
• Width: 270 mm
  + VIEW PRODUCT

PEV 450 Peristaltic Pump w/Trough (Qty 1)

• Stainless steel pump body
• Rotor with three rolls mounted on bearings, Rolls are adjustable
• Motor reducer directly applied on the bearing element
• Includes control panel, complete with reverse feature
• Includes two buffer tanks to ensure a constant flow, “inventer” electronic speed variator
• Food-grade tube standard
• Universally recognized certification against contamination by TCA – TBA agents
• 4” TRC
  + VIEW PRODUCT

PEV 280 Peristaltic Pump w/ Trough (Qty 2)

• Stainless steel pump body and AISI 304 stainless steel self-supporting stand
• Rotor with two rolls mounted on bearings and motor reducer directly applied on the bearing element
• Includes control panel, complete with reverse feature; two buffer tanks to ensure a constant flow, “inverter” electronic speed variator
• Food-grad standard piping
• Universally recognized certification against contamination
  + VIEW PRODUCT

3000L VCT Tank (Qty 2)

• 304 stainless steel, brushed finish
• Flat sloped bottom
• Floating lid – Variable capacity tank
• Stainless steel legs
• Oval side manway
• Floating lid, complete with lifting arm, gasket and manual pump with pressure gauge
• Total discharge and racking outlets, with TRC Fittings
• Sampling value
• Pressure/vacuum relief valve
• Sight gauge

4000L Conical Tank (Qty 1)

• 340 stainless steel, brushed finish
• Flat sloped bottom
• Conical top
• Stainless steel legs
• Oval side manway
• Total discharge outlet and racking outlet, with TRC fittings
• Sampling, pressure/vacuum relief valve
• Sight gauge